PDFPrintE-mail
SANISWIFTSANIVITE

SANITOP
View Full-Size Image


SANITOP

Price: Call for Pricing

Ask a question about this product

alt
The smallest and quietest macerator on the market !

The Sanitop is a system that is used to install a complete bathroom up to 12 feet below the sewer line, or even up to 120 feet away from a soil stack. It can handle the effluent from a toilet and sink. A normal operating cycle for Sanitop takes about 10 - 15 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit.
The design of this model consists of vibration absorbers which enable the reduction of operating sound by reducing the transmitted sounds from any location where such resonance transmission could occur. This new design reduces the operating sound of this pump by 10dB.

The Sanitop is simplicity itself to install; there are just five connections.
- The macerator/pump is connected to the spigot of a horizontal rear discharge toilet.
- The toilet tank is connected to the water supply.
- The macerator/pump is connected to the small diameter discharge pipe work (3/4" or 1") PVC/CPVC or copper.
- The macerator/pump is connected to an existing vent system in the building.
- The macerator/pump is connected to the electrical supply.

The Sanitop unit must be connected to our rear discharge toilet(either round or elongated). This system uses 1.6 USG (6 liters) of water per flush.

Note:
This toilet only works in combination with the Sanitop.The Sanitop has been certified to American and Canadian Standards(UPC & CSA).

alt

Motor RPM 3600
Horsepower 0.3
Electrical Supply 115 V / 60 Hz
Flow rate at max head USG/MIN 12 ft :14 gal/min; 3 ft :2min
Amperage (Consumption)" 5.0
Discharge Pipe Diameter 3⁄4"
Vertical Discharge 12 ft
Horizontal Discharge 120 ft
Maximum Temperature 104°F
Water Consumption 1.6 US gal
Dimensions (measured from floor level) H 10 7⁄16" x W 13" x D 6 1⁄2"
Materials Polypropylene, C.R.P., Stainless Steel, Neopren